Products
All our products are manufactured to international standards and every batch is laboratory tested.
Corrugated pipe fittings
Couplings, bends, tees, end caps and sealing rings for corrugated pipes.
HDPE water pipes
PE100 SDR11 PN16 water pipe
High-pressure pipe for trunk and distribution water mains.
- Ø20–1200
- PN16
- SDR11
PE100 SDR17 PN10 water pipe
Cost-effective solution for medium-pressure distribution.
- Ø50–1200
- PN10
- SDR17
PE100 SDR26 PN6 water pipe
For low-pressure and gravity lines.
- Ø90–1200
- PN6
- SDR26
PE100-RC crack-resistant pipe
Enhanced resistance for sand-free and trenchless installation.
- Ø32–630
- PN10–PN16
- RC
Coiled HDPE water pipe (Ø20–110)
Long, joint-free pipe for service connections and irrigation.
- Ø20–110
- PN6–PN16
- Bunt
HDPE gas pipes
PE100 SDR11 gas pipe
Main pipe for medium-pressure gas networks.
- Ø20–630
- MOP 10
- SDR11
PE100 SDR17.6 gas pipe
For low-pressure gas lines.
- Ø63–630
- MOP 5
- SDR17.6
PE80 SDR11 gas pipe
For small-diameter gas service connections.
- Ø20–160
- MOP 4
- PE80
PE100-RC gas pipe
Gas pipe for trenchless technologies.
- Ø32–400
- MOP 10
- RC
Corrugated pipes
Corrugated sewer pipe SN4
For gravity sewers.
- Ø110–1200
- SN4
- PE/PP
Corrugated sewer pipe SN8
For collectors under heavy loads.
- Ø110–1200
- SN8
- PE/PP
Perforated drainage pipe
For collecting groundwater.
- Ø50–200
- SN4
- PE/PVC
Corrugated cable protection pipe
For power and telecom cables.
- Ø40–200
- 450N
- HDPE
PE100 fittings
Electrofusion coupling
Reliable joint for water and gas pipes.
- Ø20–630
- SDR11
- EF
Butt-fusion elbow (45°/90°)
For changes of direction.
- Ø63–1200
- SDR11/17
- BF
HDPE tee (equal/reducing)
For branching lines.
- Ø20–630
- SDR11
- T
Compression fittings
Fast installation without welding.
- Ø20–110
- PN16
- PP
Flange adapter (stub end)
Connection to valves and pumps.
- Ø63–1200
- SDR11/17
- FL
Corrugated pipe fittings
Corrugated pipe coupling
For joining two corrugated pipes.
- Ø110–1200
- PE/PP
Rubber sealing ring
Keeps joints watertight.
- Ø110–1200
- EPDM
Corrugated pipe bend (15°–90°)
For changing the line direction.
- Ø110–630
- 15°–90°
Corrugated pipe tee
For branching off the line.
- Ø110–630
- 45°/90°
Corrugated pipe end cap
For closing the end of a line.
- Ø110–1200
PPR-C water pipes
PPR-C PN10 cold water pipe
For cold water lines.
- Ø20–110
- PN10
- ≤20°C
PPR-C PN20 hot water pipe
Universal pipe for hot and cold water.
- Ø20–110
- PN20
- ≤70°C
PPR-C PN25 glass-fibre pipe
Low-expansion pipe for heating systems.
- Ø20–160
- PN25
- ≤95°C
PPR-C PN25 aluminium-layer pipe
Oxygen-tight heating pipe.
- Ø20–110
- PN25
- AL
PVC sewer pipes
PVC indoor drain pipe
Waste water lines inside buildings.
- Ø50–110
- SN2
- Boz
PVC outdoor sewer pipe SN4
For underground gravity sewers.
- Ø110–500
- SN4
- PVC-U
PVC outdoor sewer pipe SN8
Sewers beneath heavy-traffic roads.
- Ø110–630
- SN8
- PVC-U
U-PVC pressure pipe
Pressure PVC for water supply and irrigation.
- Ø63–400
- PN6–PN16
- U-PVC
Need pipes for your project?
Send us your technical requirements — our engineers will prepare a quote within 24 hours.